Toolbox: Combo: Modeling and Estimating - Season Pass - Technical Support

RPS Modeling and Estimating Toolbox plus Single Discipline Training Season Pass plus Technical Support - Annual Subscription

Add Isopach
Computes a surcharge / overexcavation surface by adding a % of cut or fill depth to a selected surface. Can also be used to adjust a surface model to match grade at project limits or at other locations e.g. at bridge decks / abutments etc.
Adjust Linestring Elevation
Modifies the elevation of nodes / segments of a linestring
Affix Name
Applies and removes a prefix or suffix to the name of selected objects
Assign Name from Inside Text
Names closed lines using text objects that lie within the polygons area
Convert To Linestring
Convert CAD lines to linestrings. Option to remove UCS effect
Convert to MText
Converts the selected CAD text objects to multiline text objects
Corridor As Built Report
Creates a formatted Excel Spreadsheet report from measured 3D points aligned to specified station intervals against a line or alignment, sorted from Left to Right across the alignment where each column of data is a specified code and the value presented is the Delta Elevation between the measured point and the referenced surface elevation
Corridor Cut Sheet Report
Generates a Cut Sheet report in excel based on the selected corridor
Create Slope Indicators
Create slope indicator marks or "tadpole" symbols between top and toe of embankment strings
Create X-Lines
Generates section lines (XLines) and labels at key points and user defined locations along an alignment or corridor model. Can be used for Roads, Bridges, Walls and Buildings
Crop Crossing Lines
Removes sections of selected lines that cross the cropping area
Cut Fill Labels
Creates labels with Cut / Fill information at the specified locations
Define Extra Stations
Add extra station locations to corridors to improve models and reporting
Edit Alignment as Spreadsheet
Edit / Enter HAL/VAL alignment in a spreadsheet
Elevate by Attribute
Elevate GIS data using it's elevation attribute
Extend Lines
Creates lead in and lead out line extensions to linestrings for stringless pavers
Extract Surface Features
Explodes surfaces into points and lines. Finds breaklines, drape lines, boundaries and feature linework within the TIN model to reverse engineer data out of basic TIN surfaces provided in LandXML or TTM surface formats.
Geometric Selection
Selects and relayers data by geometric properties (length, aspect, nodes)
Import Boring Logs
Imports boring log data from a CSV file to create site (Takeoff) boring logs in order to rapidly build strata layers for earthworks quantity purposes.
Label Points
Create offset and cut/fill labels between selected points and a reference linestring or alignment
Layer Manager
Manage and rename layers and layer groups
Lock Views
Lock two plan views for synchronous panning and zooming
Matrix Copy
Copies objects multiple times in a rectangular grid pattern
Menu Manager
Toggle between light and dark Mode menu color schemes
Exports selected objects in the Moss - GENIO file format
Multi Offset Lines
Template driven offset line generation tool. Creates multiple offset lines from multiple source lines based on template driven instructions accessed from your personal template library. Created linework can be placed on any number of layers and be automatically incorporated into any number of surfaces.
Name by Layer
Names selected objects using the objects layer name. Allows Linestyle, Line Weight and Line Color to be set from ByLayer properties
New Layer
Creates a new layer and layer group including takeoff properties
Moves lines a very small amount in order to prevent vertical surfaces
Offset Surface
Provides the ability to offset an entire surface or an area of a surface within a clipping boundary to create a new surface model. This is a quick and easy tool to create e.g. Topsoil Strip surfaces from an Existing Ground surface model.
Optimize Linestrings
Optimizes horizontal and vertical linestring data to create curvilinear lines and alignments for stringless paver applications
PDF Vectors
Extracts vectors from georeferenced PDF images on demand using automatic and manual process controls. Lines can be layered, joined and elevated in the process, eliminating multiple Takeoff steps and increasing productivity.
Permit Area Manager
Create and tabulate project permit areas and validate total open areas
Perpendicular Distance to Surface
Computes the perpendicular distance between points and a surface
Place Aligned Blocks
Places blocks on points and orientates them to an alignment
Point Creator
Creates stakeout point data from linework and alignments for site and road projects
Point Detail Report
Customizable detailed point reports including references to surface and alignment objects
QA Lines
Provides the ability to display the slope direction, slope value, slope or horizontal length and bearing allowing you to instantly identify lines / pipes that are too steep, too shallow, flowing the wrong direction or that fall within defined tolerance ranges
Radial Points
Creates points using polar coordinate geometry
Radial Points (Script)
Creates points using scripted polar coordinate geometry
Allows rapid relayering of objects using a user specified list of layers
Remove Duplicates
Specify color, layer, position tolerance and text case parameters to identify duplicate text items and relayer or delete those identified as duplicates from imported CAD or vector PDF files.
Reverse Line
Reverses the direction of the specified line
Rotate the plan view based on an alignment, line, text object or simply rotate freehand for maximized screen use, faster and easier selections or simply to more easily read text in PDF images or CAD files. Reset to North Up when you want to return graphics to normal display mode.
RPS Copy to Clipboard
Copy TBC objects to the Windows Clipboard using our virtual VCL format for quick and easy transfer between projects in combination with the RPS Paste command. Create copies of sheet sets including all settings in the same project.
RPS Explode Solids
Explodes IFC Shell Objects and 3D Faces into 3D linework on separate color top, bottom and near vertical surface element layers. Duplicate linework is also eliminated.
RPS Export XML
Export linestring and alignment data to LandXML alignment format for stringless pavers
RPS Paste
Paste images into project from clipboard
Show Line Direction
Show the direction of a selected line
Slope Designer
Advanced tool for creating offset lines and sideslopes using combinations of slope, offset and delta elevation input or slope to target surface. Designed to provide manual or fully automated control and provide a great solution for both internal and external corner handling.
Smart Copy
Create multiple copies of any objects quickly on the same or different layers, in 2D or 3D and in any view
Smart Join
Manual and fully automated join command that solves for gaps, overlaps, crossovers, intersections in a smart way, allowing for high productivity joining of disconnected CAD or PDF linework.
Station / Offset Points
Create points using station, offset and elevation inputs along a selected alignment
Surface Area by Slope Ranges
Computes cut/fill surface area for selected surfaces reported by slope ranges
Surface Intersection Linestring
Creates linestrings where the two given surfaces intersect
Takeoff Lines
Quickly draw or digitize 2D and 3D lines with a range of enhanced elevation, line node and close controls
Text Style IO
Utility that provides the ability to save your Text Styles to an external settings file and reimport them to a different project or project template.
Text Style Manager
Manages Text Styles providing the ability to define a Stroked Font (good for CAD Speed) and a True Type Font (higher quality drawing presentation) on each text style, allowing you to swap between Stroked and True Types whenever you want to. The Stroke Font width, oblique angle and character weight can also be modified to more closely match the True Type font definition.
Toolbar Manager
Utility that provides the ability to save out your custom toolbars and import them back into a different menu configuration
Unreleased - Export IFC
Export TBC Objects in IFC format
View Filter Override
Apply override color, linestyle and lineweight to ByLayer objects on selected Layers in a specified view filter for plotting purposes
Volumes Manager
Create and manage boundaries, boundary collections and boundary groups. Compute and store volume calculations for later recall. Label and annotate drawings with volume labels and tables and generate volume reports for a variety of volumetric scenarios e.g. Stockpiles, Progress, Cut / Fill, Pay Quantities etc.